The Ultimate Urine Separator/Diverter
Take the worry out of waste with this simple solution! Just sit down and let the separator do the rest!
Made from glass reinforced plastic, with a tough gel coat, it is not only super strong, it has a hygienic finish, is easy to clean, and super easy to fit.
These separators measure approx 28cm wide and 33cm long and 16cm deep.
Why not add a modesty bung top your order. Keeps things looking nice and tidy.
To install, check out our pictures for hints and tips.
It's so easy to fit.
All you need are a drill, some small screws, between up to 10mm, a 32mm (floplast is good) push-fit pipe fitting and pipe. The urine can be diverted in to a container or piped out in to a ground soakaway, and the solids go in to a container via the rear section.
Your loo box top which your separator will fit in to is best at a 9mm thickness and upward.
Draw around the separator giving yourself space for your containers underneath; At least 10cm clearance from the sides of your box to allow for the containers and the pipework to fit. Once you have drawn around the separator you should cut at least 1-1.5cm inside of this line to allow a suitable circumference for flange play. Flange play is crucial.
32cm long, from front to back of the rim
28cm wide, from side to side of the rim
15cm from top edge to the end of urine spout (our other model is 5cm deeper)
32mm wide urine spout
11cm from surface to rear outlet (4cm shorter than our other version)
20cm x 10.5cm wide rear exit
3cm outer flange
(These are approximate +/- 0.5cm)
High quality white durable gel coat finish, reminiscent of your traditional toilet bowl.
Centre ridge to stop contamination of your solids container.
All important wide flange for ease of fitting.
Standard size fits all applications and toilet seats.
Diverter outlet fittings
34mm Plastic Compression Fitting
32mm Plastic Push-Fit
32mm (1 1/4”) Internal Diameter Reinforced (Corrugated) Flexible Pipe – secured with Jubilee Clip
28mm External Diameter Copper or Plastic Pipe
28mm Spigot – Push Fit
28mm ‘End Feed’ Copper Stub for Neater Spout Stub, 28m-33mm Pipe Attachment or for Soldered Copper Fixing
Direct to your container with bottle openings from 30mm upwards
We find the 32mm push fittings the easiest to use.
Go straight down to your soakaway or container where possible as the more bends you have the more chance you have for off-gassing of the urine.
As with all handmade products these may contain very slight blemishes due to each unit being made by a human with love and care: this will never affect the function.